SOTA outings by KØMOS and contributors

Solar Powered Ham Shack

Written by

in

,
Adding the panels

Finally everything fell in place… my shack is running on solar power only. An idea/project I have been pursuing for years but the circumstances were never perfect… until this July. Last fall, a hailstorm took care of the roof and I had to replace it. In July I was able to secure a large chunk of money from our City which is offering a (very) limited number of rebates for Photovoltaic (PV) installations. Together with the federal tax credits it will put the ROI within my life expectancy. Good enough for me.

PV: Panel Monitor

The complete system is a grid tied,  5.5 kW system – 22 panels organized in two arrays (one south and one west facing). Each panel has a microinverter to optimize production and to add some ‘intelligence’ to the system. Monitoring and  trouble shooting is a breeze. I can literally see when a bird poops on a panel and degrades my production :)

Since my shack consists only of a Yaesu FT-817, I am using the excess energy in the rest of the house. It should produce over 100% of our typical electricity  usage per year if everything goes according to plan – I guess time will tell.

Here a short clip of the installation:

httpvh://www.youtube.com/watch?v=fjCg–4V1-Q

Please add your questions and comments through Youtube.

 

 


ATTENTION !! WARNING !! There are old mountaineers, and bold mountaineers… there are no old-bold mountaineers. Hiking and mountain climbing are potentially hazardous activities particularly in Colorado with its extreme elevations. I am not accepting responsibility for any death or injury resulting from activations based on my trip reports. Proper training, experience, and personal capability assessment is required – enjoy!

Comments

26 responses to “Solar Powered Ham Shack”

  1. mjlorton Avatar
    mjlorton

    An absolutely brilliant production and a great system! Hats off to you Matt!

  2. Werner Furlan Avatar
    Werner Furlan

    I am also planning to add another 5 kW to my existing installation.
    did you check if you have any RFI into you Shortwave radio from the Inverter?

  3. k0mos Avatar
    k0mos

    Thanks Martin…

  4. k0mos Avatar
    k0mos

    Hard to say since I have a very noisy environment to start with (normally S8 or worse). Did not see a difference. I think the microinverters are an advantage in this respect compared to a string inverter.

  5. N7UN Avatar
    N7UN

    Nice installation Matt! Just out of curiosity, how did you get the “aerial” views? Guy/N7UN

  6. Christian Kuhtz Avatar
    Christian Kuhtz

    AR.drone. ;-) Guy, you didn’t watch the whole thing? ;-)

    73,
    Christian
    AK4VV

  7. k0mos Avatar
    k0mos

    Thanks Guy, shot by a remote controlled quadrocopter with a on board video cam.

  8. W4MPS Avatar
    W4MPS

    Great job Matt. I’m sure that drone will be in your backpack for a future SOTA adventure. That would sure be an interesting vid. Hope the installation works out well for you.
    73
    Marc, W4MPS

  9. k0mos Avatar
    k0mos

    Hi Marc, I though about it but size and the fact that high wind is not a friend of the drone will make it unlikely :)

  10. W4MPS Avatar
    W4MPS

    rrr. I can see you losing control on a summit and have the drone fly aimlessly until it landed in Steve’s GoatPen :-)

  11. k0mos Avatar
    k0mos

    Knowing Rooster… that would be the end of the quadrocopter ;)

  12. Jerry Taylor Avatar
    Jerry Taylor

    Very nice…Thanks for sharing. I’ll be curious to hear how the system performs over time.

  13. sunsensational Avatar
    sunsensational

    What kind of percentage diff you getting on avg between the west and south face panels? I’m gonna guess abt 12-15%??

  14. k0mos Avatar
    k0mos

    PM sent

  15. Jim Whitaker Avatar
    Jim Whitaker

    Very nice job, I do have one question, no safty gear, was anyone killed in the makeing of this film? I was actually scared a few times watching ;-)

  16. k0mos Avatar
    k0mos

    Nobody got killed or injured in making the movie. Doing a lot of mountaineering and I felt quite comfortable up there :)
    73

  17. Marcelo Veloso Avatar
    Marcelo Veloso

    solar panel with 60 cells 6×6 30volts, good solar panel layout. which micro-inverter have you used?

  18. k0mos Avatar
    k0mos

    I am using ENPHASE inverters

  19. Stiliyan Stoyanov Avatar
    Stiliyan Stoyanov

    Hello. I am really impressed by your work. I am currently writting my bachelor thesis on PV technology. Could you please tell me how much was the cost of all components used for the system you show in this video?

  20. kc0hlx Avatar
    kc0hlx

    Nice job k0mos. 73 kc0hlx

  21. Fureteur Aléatoire Avatar
    Fureteur Aléatoire

    Thats awsome Matt, that way you will have to work less & more time to climb mountains :)

  22. William Gonzalez Avatar
    William Gonzalez

    How much did you invest in this system? (estimate)

  23. T.A. Rugg Avatar
    T.A. Rugg

    What’s not to like ! :) Thanks for posting !!

  24. Gerhardbigg Avatar
    Gerhardbigg

    Where is the safety equipment Guys?

  25. cdones100 Avatar
    cdones100

    Lots of savings and no safety!!

  26. hansley maharaj Avatar
    hansley maharaj

    thanks for showing the installation you got a new subscriber thanks to
    mjlorton thanks to you both for the informative videos